OTbeat Aspire™

One of our newest products to the wearable family is the OTbeat Burn. Worn on the wrist, forearm or bicep, this device is waterproof, therefore making it sweatproof for all your workouts. The OTbeat Burn transmits heart rate to smartphones, GPS Watches and bike computers*. This ensures that you are working out to your full potential, knowing when to push more or reserve your energy.

Otbeat Aspire Wearable

Features

  • Package includes OTbeat heart rate monitor, two armbands (large and extra large), a USB charger, and a quick start guide for more information

  • Light-based technology provides accurate heart rate reading

  • Composed of fabric, the armbands are designed to provide maximum comfort during use

Caring For Your OTbeat Aspire

Clean your OTbeat Flex immediately after class. To clean the strap, remove it from your arm and use a soft towel, mild hand soap and cool water. If necessary, use a Q tip swabbed in rubbing alcohol and clean the back of the sensor on the module.

Placement For a more accurate reading, it is recommended that the Burn be placed snugly, with a two finger distance, above or below the elbow. For both location placements, ensure the optical sensor on the back makes contact with your skin. The quick start guide included in the package provides optimal placement guidance.
Battery Life Rechargeable battery with approximately 4 days’ worth of full charge
Charging Charges in approximately 2.5 hours using micro USB charger
Memory/History 48 hours of workout data storage, 8 days of daily data storage
Activity Tracking 5 heart rate zones with Orange color LED light. Ability to track heart rate zones, distance, steps and calories. Includes 7 workout options.
Data Submission for out-of-studio workout 15 meters from personal cell phone (must be ANT+ or BLE compatible) for out of studio workouts
1 Year Warranty Yes
Waterproof IP67 Sweat/Waterproof (submergible to 1m/3.3ft for 30 minutes)
Firmware Upgradeable

OTBeat Burn™

One of our newest products to the wearable family is the OTbeat Burn. Worn on the wrist, forearm or bicep, the OTbeat Burn is waterproof, therefore making it sweatproof for all your workouts. The battery performs at its optimum before 300 charging cycles, making it last as long as your workouts and then some. The OTbeat Burn transmits heart rate to smartphones, GPS Watches and bike computers (when equipped with standard ANT+ heart rate monitor). This ensures that you are working out to your full potential, knowing when to push more or reserve your energy.

Otbeat BurnWearable

Features

  • Package includes OTbeat heart rate monitor, two armbands (wrist and upper arm), a micro USB charger, and a quick start guide for more information

  • Light-based technology provides accurate heart rate reading

  • Composed of fabric, the armbands are designed to provide maximum comfort during use

Caring For Your OTbeat Burn

Clean your OTbeat Burn immediately after class or each use. For the sensor lens, use a soft cloth. You can use mild soap and cool water to clean the OTbeat Burn unit and strap. Use a cotton swab and only rubbing alcohol to clean the USB charging contacts when necessary, but do not make contact with the USB charging port. Do not use any abrasive chemicals to clean the unit, sensor, or strap as this will cause permanent damage.

FAQ’s


How do I turn the Burn on?

Once the Burn is fully charged, press the center of the splat 2 times quickly to power on the device. This is a short button press. The Blue LED will blink for 5 seconds, indicating it’s on.


How do I turn the Burn off?

This is a long button press. The Red LED light will blink continuously on for 2 seconds, and then will turn off.

Placement For a more accurate reading, it is recommended that the Burn be placed snugly, with a two finger distance, above or below the elbow. For both location placements, ensure the optical sensor on the back makes contact with your skin. The quick start guide included in the package provides optimal placement guidance.
Battery Life Rechargeable battery with up to 24 hours of continuous use battery life
Charging Charges in approximately 2.5 hours using micro USB charger
Memory/History Three days of data storage
Activity Tracking 5 heart rate zones with orange color LED light
Ability to track other metrics like distance, calories and steps and connect to a personal device outside of the studio
Data Submission for out-of-studio workout 15 meters to transmit ANT+ or BLE for out of studio workouts
1 Year Warranty Yes
Waterproof IP67 Sweat/Waterproof (submergible to 1m/3.3ft for 30 minutes)
Firmware Upgradeable

OTBeat Flex™

The Otbeat Flex is considered one of our original heart rate monitors. Worn on the forearm, it is waterproof/sweatproof. The Otbeat Flex is not only compatible with the OTbeat App, but it also transmits heart rate to smartphones, GPS Watches and bike computers*. 

Otbeat Flex Wearable

Features

  • Package includes OTbeat heart rate monitor, two armbands (large and extra large), a USB charger, and a quick start guide for more information

  • Light-based technology provides accurate heart rate reading

  • Composed of fabric, the armbands are designed to provide maximum comfort during use

Caring For Your OTbeat Flex

Clean your Flex immediately after class. To clean the strap, remove it from your arm and use a soft towel, mild hand soap and cool water. If necessary, use a Q tip swabbed in rubbing alcohol and clean the back of the sensor on the module.

Placement Must be worn on the forearm about 2-3 inches above or below the elbow. Heart monitor should be snug, but not too tight that it cuts off circulation.
Battery Life Rechargeable battery with 8 hours of continuous use battery life
Charging Charges in approximately 1.5 hours using micro USB charger
Memory/History -
Activity Tracking 3 heart rate zones with orange color LED light
Data Submission for out-of-studio workout 100 feet from personal cell phone (must be ANT+ or BLE compatible) for out of studio workouts
1 Year Warranty Yes
Waterproof IP67 Sweat/Waterproof (submergible to 1m/3.3ft for 30 minutes)
Firmware Upgradeable

OTBeat Core™

Meet the OTbeat Core, one of our original heart rate monitors. This is to be worn as a chest strap and includes a removable pod for easy cleaning.

The strap comes in two sizes (small and large) and is compatible with the OTbeat App, perfect for monitoring your progress. The OTbeat Core can also transmit your heart rate to most smartphones, GPS watches and bike computers*.

Otbeat Core Wearable

Features

  • Package includes OTbeat Pod heart rate monitor with battery and chest strap (small or large) along with a quick start guide for more information

  • Removable pod with accurate reading 

  • Soft strap made from elastic. Washable fabric and clasp.

Caring For Your OTbeat Core

Begin to clean your Core immediately after class or after each use by removing the pod from the strap. Use lukewarm water and antibacterial soap to clean the strap. Do not submerge the strap in water or in the washer or dryer. Hang the strap up to air dry, ensuring the snaps are clear of soap and water. To clean the pod, use an antibacterial wipe.

To maintain the battery life, be sure to disconnect the pod from the strap. The battery can be replaced by twisting the battery cap with a coin to access the battery.

Placement Apply a small amount of water on the sensors of your strap. Fasten the strap snugly around your sternum. Snap the pod in with the Orangetheory logo facing upright. Note that the pod should be in front of your body close to your heart. The heart rate monitor should fit snugly with the sensors touching your skin.
Battery Life Replaceable CR2032 battery with up to 1-year battery life
Charging No charging required
Memory/History -
Data Submission for out-of-studio workout 100 feet from personal cell phone (must be ANT+ or BLE compatible) for out of studio workouts
1 Year Warranty Yes
Waterproof IP67 Sweat/Waterproof (submergible to 1m/3.3ft for 30 minutes)
Firmware Upgradeable

Need additional help? See your local studio.
*When equipped with standard ANT+ heart rate monitor